Analog & Digital Panel Meters
Panel-mount meters for voltage, current and power readouts on switchboards and control panels.
About Analog & Digital Panel Meters
Panel meters give a quick, at-a-glance reading of voltage, current, frequency or power factor on a switchboard or control panel. We supply Rishabh Instruments analog and digital panel meters for LT panels, DG panels, battery chargers and control desks.
Rishabh analog meters use a moving-iron movement for AC and a moving-coil movement for DC. Meters such as the EQ moving-iron range are Class 1.5 to IS 1248. AC meters connect directly at lower currents or through a /1 A or /5 A CT, and through a /100 V or /110 V PT on HT systems. 2-in-1 versions put two readings in one case, and several meters can share a single mosaic cut-out.
Rishabh's programmable digital meters show a 4-digit LED reading, measure true RMS, and let you set the CT and PT ratio from the front keys. One meter can therefore be stocked for many feeder ratings. Both kinds follow standard DIN cut-out sizes, which keeps replacements simple.
Key specifications
| Analog movements | Moving iron (AC), moving coil (DC); 2-in-1 dual meters (EQ, PQ 2-in-1) |
|---|---|
| Analog sizes | 48, 72, 96 and 144 mm square (PQ series); 96 and 144 mm (EQ 2-in-1) |
| Analog accuracy | Class 1.5 to IS 1248 / IEC 60051 (EQ); 1.5% total max (PQ moving coil) |
| Analog AC inputs | Direct up to 60 A; CT-operated /1 A or /5 A; PT-operated /100 V or /110 V |
| Analog enclosure | IP52 case; IP54 / IP65 optional on PQ series |
| Digital meters | Rishabh digital panel meters supplied on request — we confirm the current model, display size and ratings at quotation |
| DC digital meters | ±0.5% of display end value ±1 digit (RISH Eine+ DC) |
Features & benefits
- Moving-iron meters read true RMS largely independent of waveform
- Mosaic mounting lets several analog meters share one cut-out
- Replaceable glass and bezel on EQ meters
- Glass-filled polycarbonate cases rated UL 94 V-0
- Digital meters with programmable CT/PT ratios available when a precise readout is needed
Where it’s used
- LT switchboards and PCC panels
- DG set and AMF control panels
- Battery charger and DC distribution boards
- Motor control centres
- Control desks and test benches
Standards & compliance
Analog & Digital Panel Meters — FAQs
Analog or digital panel meter — which should I choose?
An analog meter shows trends and swings at a glance and needs no auxiliary supply. A digital meter gives a precise figure, and its CT/PT ratio can be programmed on site, so one model covers many ratings.
Moving iron or moving coil?
Moving-iron meters are used for AC voltage and current. Moving-coil meters measure DC, which suits battery chargers, DC drives and solar DC buses.
Will a new meter fit my existing cut-out?
Rishabh meters follow standard square sizes (48, 72, 96 and 144 mm, plus 48×96 for digital). Give us the existing cut-out and the meter range, and we will supply a matching replacement.
Can you supply calibration certificates?
Calibration certificates can be arranged with the manufacturer on request. Tell us at the order stage.
